Skip to content

Best font for a resume: size, spacing and readability

The best font for a resume is one a reader can follow comfortably in the final file. Compare a few readable options, set a clear type hierarchy and check the exported document before sending it.

Published
Updated
Reading time
11 min
Share

In short

  • Start with a readable font that your editor can export correctly.
  • Use body text around 10 to 12 points as a starting range, then inspect the result.
  • Keep headings, dates and bullets consistent.
  • Edit excess content before making the text too small.
On this page
  1. Why font choice matters on your resume
  2. Best fonts for resume writing
  3. Serif vs. sans serif: Which is better?
  4. Font size guidelines for resumes
  5. Line spacing and margins for clarity
  6. Before and after: Font choices in action
  7. Common font mistakes to avoid
  8. Final formatting and export checks
  9. Compare the best font for a resume using your own text
  10. Use one consistent hierarchy for resume fonts
  11. Fix a resume that spills onto another page
  12. Check the best resume font in the exported file
  13. Choose the best resume font for different document needs
  14. Read font advice without turning style into a rule
  15. Choose the best font for your resume after editing
  16. Questions

Why font choice matters on your resume

A resume font should make the content easy to read. The reader needs to distinguish the name, job titles, dates and evidence without fighting crowded lines or decorative lettering. Start with a simple choice, then check the actual document rather than assuming a font’s reputation guarantees a good result.

The same font can look clear in one layout and cramped in another. Font size, line length, spacing and the amount of text all affect the result. Choose them together. A strong application can use a serif or sans serif font; the useful test is whether the information remains comfortable to read.

Best fonts for resume writing

Microsoft’s resume-font guidance includes Arial, Aptos, Calibri, Cambria and Garamond among its options. Treat them as a shortlist to try in your editor, not a ranking that applies to every resume. Availability and the exported appearance depend on the software and document.

  • Arial: Clean, modern sans serif; excellent for digital and print.
  • Aptos: Contemporary sans serif, designed for clarity.
  • Calibri: Balanced sans serif, familiar to many employers.
  • Cambria: Classic serif, good for a more traditional look.
  • Garamond: Elegant serif, readable and professional.

Serif vs. sans serif: Which is better?

Serif fonts have small finishing strokes on letters; sans serif fonts do not. Cambria and Garamond are serif examples, while Arial, Aptos and Calibri are sans serif examples. Either can work when the size and spacing are appropriate. Compare a paragraph of your own experience in the final layout rather than deciding from a font name alone.

Font size guidelines for resumes

Font size affects readability and layout. Microsoft Word suggests these ranges as starting points:

  • Body text: around 10 to 12 points as a starting range.
  • Section headings: around 12 to 14 points.
  • Name: around 18 to 24 points, depending on the layout.

Adjust as needed for your chosen font: some fonts appear larger or smaller at the same point size. Always check your resume at 100% zoom and in print to ensure it’s easy to read.

Line spacing and margins for clarity

Start with enough space between lines that each bullet is easy to follow. Keep the spacing within a section consistent, then use a slightly larger gap between sections. You do not need a different gap after every item. Check the whole page: a crowded skills block can make the layout feel cramped even when the work experience is well spaced.

Margins should leave a clear boundary around the content. A starting point near an inch can work for many documents, but the right balance depends on the page and template. Do not reduce every margin and font size just to fit another paragraph. First remove repeated claims and details that do not help with the target job.

Before and after: Font choices in action

Before: Poor font and size choices

Jordan Taylor

Columbus, OH | (614) 555-0147 | jordan.taylor@example.com

Professional Summary

Friendly and efficient customer service representative with 3+ years of experience in high-volume call centers.

Font: Comic Sans, 9pt body, 11pt headings, 14pt name

Result: Hard to read, unprofessional look, crowded layout

After: Improved font and size choices

Jordan Taylor

Columbus, OH | (614) 555-0147 | jordan.taylor@example.com

Professional Summary

Friendly and efficient customer service representative with 3+ years of experience in high-volume call centers.

Font: Calibri, 11pt body, 13pt headings, 20pt name

Result: Clean, professional, easy to scan

Common font mistakes to avoid

  • Choosing decorative lettering that makes names or job titles harder to read.
  • Shrinking the body text until it is uncomfortable at normal viewing size.
  • Mixing several font families without a clear purpose.
  • Using inconsistent bold, capitalization or spacing for the same kind of information.
  • Assuming the exported file looks exactly like the editor.

Final formatting and export checks

  • Open the final file at normal viewing size and read several paragraphs.
  • Check a print preview or printed page when useful for the application.
  • Reopen the PDF or Word export and inspect line breaks, symbols and page endings.
  • Check whether an unavailable or unsupported font has been substituted.
  • Revise the wording before shrinking already small text.

No font choice guarantees your resume will pass automated tracking systems (ATS), but using standard, readable fonts reduces the risk of errors.

Compare the best font for a resume using your own text

Copy one real experience entry into a working document and try two candidate fonts at the same nominal size. Include a job title, a date, a paragraph and several bullets. Look for the choice that makes the information easiest to follow. Do not judge only the large name at the top; most of the resume is small body text.

Then adjust the size slightly for each font. A nominal 11-point setting does not make every family appear equally large. Check lowercase letters, numbers and punctuation. If you have a long email address, a qualification abbreviation or technical terms, make sure they remain distinguishable without enlarging the screen.

  • Can you read a full bullet without losing your place?
  • Are dates clear enough to scan alongside the employer names?
  • Do bold headings stand apart without overpowering the content?
  • Does the contact line stay readable at the size you chose?

Keep the better candidate and stop comparing once it meets the practical needs of the application. Font selection should support the resume, not replace the work of choosing relevant experience. A readable document in a familiar typeface is a sensible result.

Use one consistent hierarchy for resume fonts

Decide how you will treat each type of information. The name can be largest, section headings smaller and body text smaller again. Job titles can use bold within the body scale. Dates and locations should remain readable; making them faint or tiny can obscure the chronology a hiring manager needs.

One font family with regular and bold styles is often enough. If you use a second family for headings, check that the combination remains calm and consistent. Avoid changing fonts for individual skills or achievements. The emphasis should come from the structure and wording, not from every line competing for attention.

Example type hierarchy to test

Name: 20 points, bold.

Section headings: 13 points, bold.

Experience and skills: 11 points, regular.

Job titles: 11 points, bold.

Dates: 11 points, regular.

These settings are an example to test, not a universal prescription. If your chosen font appears small, increase it and edit the content to recover space. If the heading wraps awkwardly, shorten the heading or adjust the layout before adding another font.

Fix a resume that spills onto another page

Look for repetition before touching the font size. A summary may repeat the same skills listed immediately below it, and older jobs may contain duties that no longer matter. Removing those lines can improve both relevance and layout. Keep dates and job titles intact while shortening the explanation beneath them.

Next inspect paragraph spacing and accidental blank lines. A page break caused by a stray empty paragraph is different from a document that needs more room for useful experience. Keep headings with the text they introduce, and avoid leaving a single bullet isolated on a new page.

If relevant experience still needs a second page, a readable two-page document can be more useful than a compressed one-page version. Follow any explicit employer length requirement, but do not assume that every resume must fit the same template. The goal is a clear application with proportionate detail.

Check the best resume font in the exported file

The file you send is the version that matters. Open it after export and inspect the first and last lines of each section. Check symbols, bullet alignment and links, then look for words that moved onto a new line. If a font was substituted, the document may need spacing adjustments even when the text is still present.

When submitting a Word document, keep the layout straightforward and check the file in the intended application where possible. When submitting a PDF, verify that the text can be selected and copied in a sensible order. This does not certify compatibility with every applicant tracking system, but it can reveal obvious export problems.

A font cannot guarantee an ATS result or an interview. Use accurate content, recognizable section headings and the requested file type. Readability checks help you catch problems you can observe; they should not become promises about how every recruitment system works.

Choose the best resume font for different document needs

A text-heavy professional resume needs comfortable body text and enough space for the work history. Start with a simple font family and compare the longest experience entry. If a serif choice feels too dense at the size you selected, try a sans serif option or increase the size. The decision should come from the actual page, not a rule that every industry needs a particular style.

A short student resume has a different problem: large empty areas can tempt you to enlarge every line. Keep the type scale proportionate and add only relevant projects, coursework or experience. A bigger font does not make a thin claim more persuasive. Use the space to make the information easy to scan rather than decorate the page.

For a creative role, the resume can still use a restrained, readable font. Let the portfolio demonstrate visual work. A distinctive heading may be appropriate, but it should not make the contact details or experience difficult to read. A professional resume is a working document, and clarity remains useful even when the application includes creative samples.

For a career change, typography can help distinguish sections without obscuring the chronology. Use consistent headings for transferable projects and employment history. Avoid making old dates tiny or giving the target role a much larger treatment than the evidence supporting it. The font should help a hiring manager understand the story, not conceal a gap.

If you share the document in several formats, check each export separately. The best font for your resume in a PDF may appear differently in an editable Word file when a recipient lacks that font. Keep a clean source copy, use supported export options and inspect what you send. Do not assume that the same filename means two formats have identical layout.

Finally, consider reading conditions. A recruiter may open the file on a laptop, another person may print it and an interview panel may refer to it in a meeting. You cannot control every setting, but you can avoid very small text, weak contrast and crowded lines. A readable resume font and consistent spacing give the content a fair chance to be understood.

Read font advice without turning style into a rule

Advice about resume fonts often uses words like modern, classic, traditional or professional. These labels describe an impression, not a hiring requirement. A classic serif font can look clean in a modern layout, and a sans serif font can look crowded when the design has too much content. Look at the actual document before deciding whether the style is right for your application.

If you want a traditional appearance, try a serif font from your editor’s available choices and compare it with a simple sans serif font. If you are looking for a modern appearance, start with clean spacing and a clear hierarchy rather than searching for unusual fonts. The design of the page matters as much as the typeface label.

Treat tips about font sizes as starting points. Different fonts have different proportions, and a character can look smaller or larger at the same setting. Create a short comparison using your own resume, then read it at normal size. Recruiters need to understand the content; they do not need to see how many fonts you can combine.

Stick with a consistent style across the document once you find a readable combination. Do not switch between serif fonts and sans serif fonts for every section. Keep script lettering and decorative effects out of dense body text when they make it harder to read. A clean professional design is usually easier to maintain through revisions and exports.

When applying, focus on the employer’s stated instructions rather than a claim that one font is always best. Free resume tips may describe a font as ATS friendly, but that phrase is not a guarantee. Check the file yourself, keep the content accurate and use the format requested for the job. These practical checks are more useful than chasing a supposedly perfect typeface.

Choose the best font for your resume after editing

Finish the content before making fine typography adjustments. A clear resume summary and a focused skills section reduce the pressure to squeeze in unnecessary lines. Choose a font that supports the information and keep the treatment consistent.

You can try writing and editing in Kandiq without paying; PDF and Word downloads require a paid plan. Whichever editor you use, reopen the downloaded file before sending it and follow the employer’s format instructions.

Frequently asked questions.

A readable font that works correctly in your final document. Arial, Aptos, Calibri, Cambria and Garamond are options to test. Compare them using your own text, then choose the one that stays clear at a comfortable size.

Sources

  1. The best resume fonts and sizes, Microsoft Word

About the author

Diego Benitez

Founder of Kandiq, more than 100 hires led

Diego Benitez has hired more than a hundred people, in marketing, sport and sales, as a manager at Intersport and then as Head of Growth at Goodvest (2022 to 2026). He ran those hiring processes from start to finish: screening applications, interviews, the hiring decision, then managing the team. He also knows the candidate's side: internships, work-study, student jobs, a permanent contract, starting an agency, then freelancing. He built Kandiq to give candidates what he looked for in an application himself, and what screening software can read. His guides start from the questions candidates ask Google, rely on official public sources (government employment and careers services, employment law) and are updated when the rules change. The examples are fictional; the figures are sourced.

Your resume, ready to send.